Vossloh Schwabe (VS) Vossloh-Schwabe

For datasheet click here. Price is per piece. Ref. No.: 101784 G13 lamp holderFor push-fitting onto lamps T8Lampholder thickness: 9.5 mmCasing: PC, white, T110Front cover plate: PBT GF, whiteNominal rating: 2/500Push-in terminals: 0.5–1 mm²Fixing hole for screw M3Weight: 5.3 g, unit: 1000 pcs.Type: 47900

For datasheet click here. Shape: 28x41 mm Electromagnetic safety transformers for low-voltage halogen incandescent lamps 12 V Vacuum-impregnated with polyester resin Screw terminals: 0.5–2.5 mm² Protection class I For these transformers without thermal cut-out, a slow-acting fuse should be installed in the wiring on site Type: STr 50/12.342 Ref. No.:...

For datasheet click here. Electronic Superimposed Ignitors for HS and HI Lamps250 to 1000 WStandard version or with automatic switch-offFor high-pressure sodium lamps (HS)and metal halide lamps (HI)Phasing of the ignition voltage:60–90 °el and 240–270 °elMax. permitted casing temperature: 105 °CScrew terminals: 0.75–2.5 mm²(Z 1000 S: 0.75–4 mm²)Fastening: male nipple...

For datasheet clicks here. Vossloh Schwabe Metal Halide & Sodium 35-400 Watt Ignitor Standard version or with automatic switch-off Compact shape For high-pressure sodium lamps (HS), metal halide lamps (HI) and ceramic discharge lamps (C-HI) Ignition voltage: 4–5 kV Phasing of the ignition voltage: 60–90 °el and 240–270 °el Max....

For datasheet click here. EasyLineLED ConstantvoltageDrivers24 V / max. 30 W/60W/75W/120W These compact LED constant-voltage driversare designed for use in applications withlow capacity range of up to 30 W.Electronic characteristicsPower factor at full load: > 0.9 CConnection detailsMains voltage: 220–240 V ±10 %Mains frequency: 50–60 HzScrew terminals: 0.5–1.5 mm²Safety featuresElectronic...

For datasheet click here. EasyLine LED Drivers – Dimmable 150–700 mA/max. 6–36 W Electrical characteristics The secondary side switching of LED modules is not allowed. Power factor at full load: > 0.85 Dimming Dimmable (anaglogue) with a phase-cutting trailing-edge dimmer. A minimum dimmer load has to be observed. The compatibility...

Technical Details Datasheet PrimeLineDIP switch C-R3Product features• Compact casing shape• For independent operation with cord grip• For built-in without cord gripFunctions• The required current output can be chosenby dip switches.• Suitable for central battery system foremergency lighting acc. to EN 50172Electrical features• Mains voltage: 220–240 V ±10%• Mains frequency: 50–60...

Technical Details Datasheet ELXc – Warm start for compact fluorescent lamps – Independent ballasts For ELXc 257.836 a loop-through of the mains supply is possible ELXc 213.870, 218.871, 142.872, 242.837, 155.378 have a second earth terminal to ground the luminaires Output Power: 26W Type:  TC-DEL/-TEL Base:  G24q-3/GX24q-3 Power Consumption: 2 x...

*Check stock before ordering. Lead time 1-2 weeks ARO.* For the datasheet click here. Standard version For metal halide lamps (HI) Phasing of the ignition voltage: 60–90 °el and 240–270 °el Max. permitted casing temperature: 105 °C Screw terminals: 0.75–2.5 mm2 Fastening: male nipple with pre-assembled washer and nut For...

Technical Details Datasheet Datasheet Electronic built-in ballastsCasing: metalPower factor: ≥0.95DC voltage for operation: 176–254V, for ignition: 198–254VPush-in terminals: 0.5–1mm²For the automatic luminaire wiring: IDC terminals for leads H05V-U 0.5RFI-suppressedFor luminaires of protection class IDegree of protection: IP20For lighting systems with high switching frequency (> 5/day)EOL shut down approved acc. to...

Technical Details Datasheet EasyLineSimple Fix C-R30Product features• Compact casing shapeElectrical features• Mains voltage: 220–240 V ±10%• Mains frequency: 50–60 Hz• Push-in terminals: 0.5–2.5 mm² or1.5–2.5 mm² (186708, 186709)• Power factor at full loadSafety features• Protection against transient main peaksup to 1 kV (between L and N)• Electronic short-circuit protection• Overload...

Technical Details Datasheet Electronic Built-in BallastsELXc New EffectLine – Warm Start for T5 LampsAutomatic restart after lamp has been changedCasing: metalConnection: push-in terminals with lever opener0.5–1 mm²Switching frequency: for lighting systems with highswitching frequency (> 5/day)EOL shut down: approved acc. to EN 61347Test 1