PHILIPS HF-Selectalume TLD Flourescent Ballast
$ 20.00
$ 34.00
Many In Stock
Ballast /Drivers
913713032166
E5
General Information
Operating and Electrical
Wiring
System characteristics
Temperature
Mechanical and Housing
Emergency Operation
Approval and Application
| Application Code |
II
|
| Type Version |
mk1
|
| Lamp Type |
TL-D
|
| Number of Lamps |
1/2/3 piece/unit
|
| Number of Products on MCB (16A Type B) (Nom) |
28
|
| Automatic Restart |
Yes
|
| Input Voltage |
220 to 240 V
|
| Input Frequency |
50 to 60 Hz
|
| Operating Frequency (Nom) |
45 kHz
|
| Crestfactor (Nom) |
1.7
|
| Power Factor 100% Load (Nom) |
0.98
|
| Preheat Time |
1.6 s
|
| Mains Voltage Performance (AC) |
202-254V-8%-+6%
|
| Mains Voltage Safety (AC) |
198-264V-10%-+10%
|
| Earth Leakage Current (Max) |
0.5 mA
|
| Inrush Current Width |
0.35 ms
|
| Ballast Factor (Nom) |
1.05
|
| Power Losses (Nom) |
3.8 W
|
| Inrush Current Peak (Max) |
18 A
|
| Connector Type Input Terminals |
WAGO 744 connector
|
| Cable Capacity Output Wires Mutual (Max) |
200 pF
|
| Connector Type Output Terminals |
WAGO 744 connector [ Suitable for manual wiring]
|
| Cable Length Hot Wiring |
0.75 m
|
| Wire Striplength |
8.0-9.0 mm
|
| Dual Fixture Master/Slave |
Possible, lamp wires 2m max. length [ Master/Slave operation possible]
|
| Input Terminal Cross Section |
0.50-1.50 mm²
|
| Output Terminal Cross Section |
0.50-1.50 mm²
|
| Cable Capacity Cold Output Wires - Earth (Max) |
200 pF
|
| Cable Capacity Hot Output Wires - Earth (Max) |
200 pF
|
| Rated Ballast-Lamp Power |
36 W / 58 W / (18/36) W
|
| Rated Lamp Power on TL-D |
36 W
|
| System Power on TL-D |
38.8 W
|
| Lamp Power on TL-D |
35 W
|
| Power Loss on TL-D |
3.8 W
|
| T-Ambient (Max) |
55 °C
|
| T-Ambient (Min) |
-20 °C
|
| T-Storage (Max) |
80 °C
|
| T-Storage (Min) |
-40 °C
|
| T-Case Lifetime (Nom) |
75 °C
|
| T-Case Maximum (Max) |
75 °C
|
| Housing |
L 280x30x28
|
| Nominal Light Output After 60 Seconds |
100% of EBLF
|
| Normal Operating Voltage (DC) |
220-240 V
|
| Battery Voltage Guaranteed Operation |
176-275 V
|
| Battery Voltage Guaranteed Ignition |
186-275 V
|
| Emergency Ballast Lumen Factor (EBLF) (Nom) |
100 %
|
| Nominal Light Output After 5 Seconds |
50% of EBLF
|
| Energy Efficiency Index |
A2 BAT
|
| IP Classification |
IP 20 [ Ingress Protection 20]
|
| EMI 9 kHz ... 30 MHz |
EN55015
|
| Vibration Standard |
IEC68-2-6 F c
|
| Bumps Standard |
IEC 68-2-29 Eb (10G/16ms)
|
| Approval Marks |
F-Marking CE marking ENEC certificate CCC certificate C-Tick certificate PSB certification TISI marking SIRIM approval CB Certificate CCC certificate VDE-EMV certificate |
| Hum And Noise Level |
< 30 dB(A)
|
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.