$ 120.00 $ 283.55

Many In Stock

LED Bulb



Add to wishlist
ST8V-0.6M 8W/865 230V EM 25X1 G7APMOSRAM
ST8V-0.6M 8W/840 230V EM 25X1 G7APMOSRAM
ST8V-0.6M 8W/830 230V EM 25X1 G7APMOSRAM
ST8V-1.2M 16W/865 230V EM 25X1G7APMOSRAM
ST8V-1.2M 16W/840 230V EM 25X1G7APMOSRAM
ST8V-1.2M 16W/830 230V EM 25X1G7APMOSRAM
ST8V-1.5M 20W/865 230V EM 25X1G7APMOSRAM
ST8V-1.5M 20W/840 230V EM 25X1G7APMOSRAM

ST8V-1.5M 20W/830 230V EM 25X1G7APMOSRAM

Electrical data

Nominal wattage 8 W /16W /20W
Rated wattage 8 W / 16W /20W
Nominal voltage 220…240 V
Operating frequency 50…60 Hz
Nominal current 0.036 A
Type of current AC
Max. lamp no. on circuit break. 10 A (B)
170 / 20 / 180 
Max. lamp no. on circuit break. 16 A (B)
280 / 30 / 290 
Power factor λ > 0.90

Photometrical data

Light color (designation) Cool Daylight
Rated color temperature 6500 K / 3000K / 4000K
Nominal luminous flux 800 lm / 1600 lm / 2000 lm
Rated luminous flux 800 lm / 1600 lm / 2000lm
Rated lamp efficacy (standard condition) 100 lm/W
Color rendering index Ra >80
Lumen main.fact.at end of nom.life time 0.70
Standard deviation of color matching ≤6 sdcm

Light technical data

Starting time < 0.5 s
Warm-up time (60 %) < 0.50 s
Rated beam angle (half peak value) 220.00 °

Dimensions & weight

Length with base excl. base pins/connection 589.00 mm
Tube diameter 26 mm
Base diameter 27.5 mm
Product weight 110.00 g
Overall length 603.0 mm

Temperatures & operating conditions

Ambient temperature range -20…+45 °C
Maximum temperature at tc test point
65 °C 


Lifespan 30000 h
Nominal lamp life time 30000 h
Rated lamp life time 30000 h
Number of switching cycles 200000

Additional product data

Base (standard designation) G13
Mercury-free Yes
Product remark When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system/Not usable in luminaires with serial lamp connection, i.e. more than one tube at one magnetic ballast (tandem circuitry)


Dimmable No

Certificates & standards

Type of protection IP20
Standards CE
Energy efficiency class A+
Energy consumption 8 kWh/1000h

Country-specific categorizations

ILCOS DR-8/865-G13-26/590
Order reference ST8V-0.6M 8W/86

Logistical data

Temperature range at storage -20…80 °C


Ask a Question
  • Hi, How do I replace an OSRAM VALUE EM LED T8 TUBE onto a standard fluorescent T8 tube? Do I have to remove the ballast? I am fine with removing the ballast if OSRAM VALUE EM LED T8 TUBE has its own internal driver. Just need to check the correct installation. Thank you.

    OSRAM VALUE EM LED T8 Tubes are compatible with Electronic ballasts, hence no bypass is required.  However, if the ballast is Magnetic then Bypass is required.   

Recently Viewed Items