Type

Communication Protocol

Blank

PMBus protocol

CAN

CANBus protocol

MODEL

RCB-1600-12

RCB-1600-24

RCB-1600-48

OUTPUT

BOOST CHARGE VOLTAGE(Vboost)(default)

14.4V

28.8V

57.6V

FLOAT CHARGE VOLTAGE(Vfloat)(default)

13.8V

27.6V

55.2V

CONSTANT CURRENT(CC)(default)

100A

55A

27.5A

RATED POWER

1440W

1584W

1584W

VOLTAGE ADJ. RANGE

By built-in potentiometer, SVR

11.5 ~ 15V

23.5 ~ 30V

47.5 ~ 58.8V

RECOMMENDED BATTERY

CAPACITY(AMP HOURS) Note.3

330 ~ 1000Ah

180 ~ 550Ah

90 ~ 270Ah

LEAKAGE CURRENT FROM

BATTERY (Typ.)                  Note.8

<45mA

INPUT

VOLTAGE RANGE             Note.4

90 ~ 264VAC           127 ~ 370VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

0.97/230VAC at full load

EFFICIENCY (Typ.)

90.5%

92%

93%

AC CURRENT (Typ.)         Note.4

14A/115VAC 8A/230VAC

15A/115VAC          8.5A/230VAC

INRUSH CURRENT (Typ.)

COLD START 35A/230VAC

LEAKAGE CURRENT

<1.5mA / 230VAC

PROTECTION

OVER VOLTAGE

15.75 ~ 18.75V

31.5 ~ 37.5V

63 ~ 75V

Protection type : Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

OUTPUT VOLTAGE PROGRAMMABLE(PV) Note 5

Adjustment of output voltage is allowable to 75 ~ 125% of nominal output voltage Please refer to the Function Manual.

OUTPUT CURRENT PROGRAMMABLE(PC) Note 5

Adjustment of output current is allowable to 20 ~ 100% of rated current Please refer to the Function Manual.

AUXILIARY POWER

5V @ 0.3A, 12V @ 0.8A

REMOTE ON-OFF CONTROL

By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual

TEMPERATURE COMPENSATION

-3mV / ℃ / cell / (12V = 6 cells ; 24V = 12 cells ; 48V = 24 cells)

DC OK SIGNAL

The isolated TTL signal out. Please refer to the Installation Manual

AC OK SIGNAL

The isolated TTL signal out. Please refer to the Installation Manual

ENVIRONMENT

WORKING TEMP.

-30 ~ +70℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +85℃, 10 ~ 95% RH non-condensing

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

(Note 6)

SAFETY STANDARDS

UL60950-1, TUV EN60950-1, EAC TP TC 004 approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC (0.5KVAC for 12V)

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

Compliance to EN55032 (CISPR32) Conduction Class B, Radiation Class A ; EN61000-3-2,-3, EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), Heavy industry level, criteria A, EAC TP TC 020

OTHERS

MTBF

160.1K hrs min.       Telcordia SR-332 (Bellcore) ; 38.9K hrs min.      MIL-HDBK-217F (25℃)

DIMENSION

300*85*41mm (L*W*H)

PACKING

1.87Kg; 6pcs/12.2Kg/1.16CUFT

NOTE

1.  Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.

2.  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

3.  This is MEAN WELL's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.

4.  Derating may be needed under low input voltages. Please check the derating curve for more details.

5.  PV/PC functions when users are not operating on PMBus/CANBus. SVR functions when users are neither operating on PMBus/CANBus nor using PV/PC.

6.  The charger is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on

a 720mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com}

7.  The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft}.

8.  When charging lead acid battery or battery without BMS, use breaker to disconnect charger and battery after fully charged.