USAGE AREA

MEANWELL PB 120W Single Output Power Supply or Battery Charger

$ 66.19 $ 89.50

Many In Stock

Ballast /Drivers

PB-120P-27P

S7

Add to wishlist

Features :

  • AC input range selected by switch
  • Built-in passive PFC function compliance to EN61000-3-2
  • With AC ON-OFF switch
  • 3 poles AC inlet with fuse holder
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Charger type can be selected (Optional}
  • Charger for lead-acid batteries
  • 2 color LED loading indicator
  • Open frame models available (Without safety approval}
  • Low cost, High reliability

SPECIFICATION

MODEL

PA/PB-120 -13

PA/PB-120 -27

PA/PB-120 -54

 

 

 

OUTPUT

DC VOLTAGE

13.8V

27.6V

55.2V

RATED CURRENT

7.2A

4.3A

2.2A

CURRENT RANGE

0 ~ 7.2A

0 ~ 4.3A

0 ~ 2.2A

RATED POWER

99.36W

118.68W

121.44W

 

LED INDICATED

PA series voltage 105% 1% : RED / 105% 1% :GREEN

PB series load 46% 10% : GREEN / 46% 10% :RED

 

 

 

 

INPUT

VOLTAGE RANGE

88 ~ 132VAC / 176 ~ 264VAC selected by switch

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

>0.65 (with PFC series)

EFFICIENCY (Typ.)

73%

79%

79%

AC CURRENT (Typ.)

3A/115VAC         1.5A/230VAC

INRUSH CURRENT (Typ.)

COLD START 25A/115VAC            50A/230VAC

LEAKAGE CURRENT

<1.5mA / 240VAC

 

 

 

 

PROTECTION

 

OVERLOAD

90 ~ 110% rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

 

OVER VOLTAGE

15 ~ 17V

30 ~ 35V

60 ~ 66V

Protection type : Hiccup mode, recovers automatically after fault condition is removed

 

OVER TEMPERATURE

RTH2  70        10  detect on RTH2 thermistor

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

 

 

 

ENVIRONMENT

WORKING TEMP.

-10 ~ +45  (Refer to output load derating curve)

WORKING HUMIDITY

20 ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-20 ~ +85  , 10 ~ 95% RH

TEMP. COEFFICIENT

0.05%/  (0 ~ 45

 

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

 

 

SAFETY & EMC

(Note 4)

SAFETY STANDARDS

UL60950-1, TUV EN60950-1, EN60335, EN60335-1, EN60335-2-29 approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMI CONDUCTION & RADIATION

Compliance to EN55022 (CISPR22) Class B

HARMONIC CURRENT

Compliance to EN61000-3-2,-3

EMS IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A

 

OTHERS

MTBF

149.6K hrs min.        MIL-HDBK-217F (25 )

DIMENSION

PCB Type:144*90*33mm             External case type:180*96*49mm (L*W*H)

PACKING

1.1Kg; 16pcs / 17.9Kg / 1.47CUFT(without PFC)                1.24Kg; 16pcs / 20.1Kg / 1.47CUFT(with PFC)

NOTE

1.  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25  of ambient temperature.

2.  Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.  Tolerance : includes set up tolerance, line regulation and load regulation.

4.  The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5.  With PFC I/P range: 95~132VAC/190~264VAC.

6.  For open P.C.B. WITH 17.8CFM min. Forced air.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Recently Viewed Items


People who bought this product, also bought