USAGE AREA

MEANWELL LPF Series Constant Voltage Power Supply

$ 36.52 $ 82.00

Many In Stock

Ballast /Drivers

LPF-16D-12

S7

Add to wishlist

Features:

  • Constant current mode output
  • Plastic housing with class II design
  • Built in active PFC function
  • Class 2 power unit
  • IP67 rating for indoor or outdoor installations
  • Function:3 in 1 Dimming
  • Typical lifetime > 50000 hrs

Applications:

  • LED downlight
  • LED spotlight
  • LED decorative lighting
  • LED tunnel lighting

Model Encoding:

LPF-16D-15

LPF----->Series name

16D---->Rated wattage

15---->Rated output voltage{12/15/24/30/42}

SPECIFICATION

MODEL

LPF-16D-12

LPF-16D-15

LPF-16D-20

LPF-16D-24

LPF-16D-30

LPF-16D-36

LPF-16D-42

LPF-16D-48

LPF-16D-54

 

 

 

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

30V

36V

42V

48V

54V

RATED CURRENT

1.34A

1.07A

0.8A

0.67A

0.54A

0.45A

0.39A

0.34A

0.3A

RATED POWER                Note.5

16.08W

16.05W

16W

16.08W

16.2W

16.2W

16.38W

16.32W

16.2W

CONSTANT CURRENT REGION Note.2

6.6 ~12V

8.25 ~ 15V

11 ~ 20V

13.2 ~ 24V

16.5 ~ 30V

19.8 ~ 36V

23.1 ~ 42V

26.4 ~ 48V

29.7 ~ 54V

CURRENT RIPPLE

5.0% max. @rated current

CURRENT TOLERANCE

±5.0%

SETUP, RISE TIME Note.6

1500ms, 80ms / 115VAC         500ms, 80ms / 230VAC

HOLD UP TIME (Typ.)

16ms/230VAC            16ms/115VAC

 

 

 

 

 

 

 

INPUT

VOLTAGE RANGE            Note.5

90 ~ 305VAC           127 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)

83%

83%

84.5%

84.5%

84.5%

85%

85%

85%

84.5%

AC CURRENT

0.4A / 115VAC           0.25A / 230VAC           0.2A/277VAC

INRUSH CURRENT(Typ.)

COLD START 45A(twidth=200μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

 

 

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE

15 ~ 18V

17.5 ~ 21V

23 ~ 27V

28 ~ 35V

34 ~ 40V

41 ~ 49V

46 ~ 54V

54 ~ 63V

59 ~ 66V

Shut down and latch off o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

 

 

 

ENVIRONMENT

WORKING TEMP.

Tcase=-35 ~ +70℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=+70℃

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

 

SAFETY & EMC

SAFETY STANDARDS Note.8

UL8750, CSA C22.2 No. 250.0-08, ENEC EN61347-1, EN61347-2-13 independent,EN62384,J61347-1,J61347-2-13,

EAC TP TC 004,GB19510.1,GB19510.14 approved, IP67(optional); Design refer to UL60950-1, TUV EN60950-1

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION Note.8

Compliance to EN55015,EN61000-3-2 Class C (@load≧55%) ; EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020

 

OTHERS

MTBF

1249.2K hrs min.       Telcordia SR-332 (Bellcore) ;     420.1Khrs min.      MIL-HDBK-217F (25℃)

DIMENSION

148*40*32mm (L*W*H)

PACKING

0.21Kg;40pcs/9.4Kg/ 1.02CUFT

MODEL

LPF-25D-12

LPF-25D-15

LPF-25D-20

LPF-25D-24

LPF-25D-30

LPF-25D-36

LPF-25D-42

LPF-25D-48

LPF-25D-54

 

 

 

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

30V

36V

42V

48V

54V

RATED CURRENT

2.1A

1.67A

1.25A

1.05A

0.84A

0.7A

0.6A

0.53A

0.47A

RATED POWER                Note.5

25.2W

25.05W

25W

25.2W

25.2W

25.2W

25.2W

25.44W

25.38W

CONSTANT CURRENT REGION Note.2

6.6 ~12V

8.25 ~ 15V

11 ~ 20V

13.2 ~ 24V

16.5 ~ 30V

19.8 ~ 36V

23.1 ~ 42V

26.4 ~ 48V

29.7 ~ 54V

CURRENT RIPPLE

5.0% max. @rated current

CURRENT TOLERANCE

±5.0%

SETUP, RISE TIME Note.6

1500ms, 80ms / 115VAC         500ms, 80ms / 230VAC

HOLD UP TIME (Typ.)

16ms/230VAC            16ms/115VAC

 

 

 

 

 

 

 

INPUT

VOLTAGE RANGE            Note.5

90 ~ 305VAC           127 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)

84%

84%

85%

85.5%

85.5%

85.5%

85.5%

86%

86%

AC CURRENT

0.4A / 115VAC           0.25A / 230VAC          0.2A/277VAC

INRUSH CURRENT(Typ.)

COLD START 50A(twidth=200μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

12 units (circuit breaker of type B) / 21 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

 

 

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE

15 ~ 18V

17.5 ~ 21V

23 ~ 27V

28 ~ 35V

34 ~ 40V

41 ~ 49V

46 ~ 54V

54 ~ 63V

59 ~ 66V

Shut down and latch off o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

 

 

 

ENVIRONMENT

WORKING TEMP.

Tcase=-35 ~ +70℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=+70℃

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

 

SAFETY & EMC

SAFETY STANDARDS Note.8

UL8750, CSA C22.2 No. 250.0-08,ENEC EN61347-1, EN61347-2-13 independent, EN62384,J61347-1,J61347-2-13,

EAC TP TC 004,GB19510.1,GB19510.14,IP67 approved ;Design refer to UL60950-1, TUV EN60950-1

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION Note.8

Compliance to EN55015,EN61000-3-2 Class C (@load≧55%) ; EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020

 

OTHERS

MTBF

1190.8K hrs min.       Telcordia SR-332 (Bellcore) ;     418.5Khrs min.      MIL-HDBK-217F (25℃)

DIMENSION

148*40*32mm (L*W*H)

PACKING

0.36Kg; 40pcs/ 15.4Kg/1.02CUFT

MODEL

LPF-40D-12

LPF-40D-15

LPF-40D-20

LPF-40D-24

LPF-40D-30

LPF-40D-36

LPF-40D-42

LPF-40D-48

LPF-40D-54

 

 

 

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

30V

36V

42V

48V

54V

RATED CURRENT

3.34A

2.67A

2A

1.67A

1.34A

1.12A

0.96A

0.84A

0.76A

RATED POWER                Note.5

40.08W

40.08W

40W

40.08W

40.2W

40.32W

40.32W

40.32W

41.04W

CONSTANT CURRENT REGION Note.2

7.2 ~12V

9 ~ 15V

12 ~ 20V

14.4 ~ 24V

18 ~ 30V

21.6 ~ 36V

25.2 ~ 42V

28.8 ~ 48V

32.4 ~ 54V

CURRENT RIPPLE

5.0% max. @rated current

CURRENT TOLERANCE

±5.0%

SETUP, RISE TIME Note.6

1000ms, 80ms / 115VAC         500ms, 80ms / 230VAC

HOLD UP TIME (Typ.)

16ms/230VAC            16ms/115VAC

 

 

 

 

 

 

 

INPUT

VOLTAGE RANGE            Note.5

90 ~ 305VAC           127 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)

84%

85%

86%

87%

88%

88%

88.5%

89%

89%

AC CURRENT

0.6A / 115VAC           0.3A / 230VAC          0.25A/277VAC

INRUSH CURRENT(Typ.)

COLD START 50A(twidth=210μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

 

 

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE

15 ~ 17V

17.5 ~ 21V

23 ~ 27V

28 ~ 35V

34 ~ 40V

41 ~ 49V

46 ~ 54V

54 ~ 63V

59 ~ 66V

Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, re-power on to recover

 

 

 

ENVIRONMENT

WORKING TEMP.

Tcase=-40 ~ +80℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=+80℃

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

 

SAFETY & EMC

SAFETY STANDARDS Note.8

UL8750, CSA C22.2 No. 250.0-08, ENEC EN61347-1, EN61347-2-13 independent, EN62384,EAC TP TC 004, IP67, J61347-1, J61347-2-13,GB19510.1,GB19510.14 approved ; design refer to UL60950-1, TUV EN60950-1

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION Note.8

Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020

 

OTHERS

MTBF

1144.7K hrs min.       Telcordia SR-332 (Bellcore) ;     394.9Khrs min.      MIL-HDBK-217F (25℃)

DIMENSION

162.5*43*32mm (L*W*H)

PACKING

0.45Kg; 32pcs/15.4Kg/0.93CUFT

MODEL

LPF-60-12

LPF-60-15

LPF-60-20

LPF-60-24

LPF-60-30

LPF-60-36

LPF-60-42

LPF-60-48

LPF-60-54

 

 

 

 

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

30V

36V

42V

48V

54V

CONSTANT CURRENT REGION Note.2

7.2 ~12V

9 ~ 15V

12 ~ 20V

14.4 ~ 24V

18 ~ 30V

21.6 ~ 36V

25.2 ~ 42V

28.8 ~ 48V

32.4 ~ 54V

RATED CURRENT

5A

4A

3A

2.5A

2A

1.67A

1.43A

1.25A

1.12A

RATED POWER                Note.5

60W

60W

60W

60W

60W

60.12W

60.06W

60W

60.48W

RIPPLE & NOISE (max.) Note.3

150mVp-p

150mVp-p

150mVp-p

150mVp-p

200mVp-p

250mVp-p

250mVp-p

250mVp-p

350mVp-p

VOLTAGE TOLERANCE Note.4

±4.0%

±4.0%

±4.0%

±4.0%

±4.0%

±4.0%

±4.0%

±4.0%

±4.0%

LINE REGULATION

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

LOAD REGULATION

±2.0%

±1.5%

±1.0%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

±0.5%

SETUP, RISE TIME Note.6

1000ms, 80ms / 115VAC 500ms, 80ms / 230VAC

HOLD UP TIME (Typ.)

16ms/230VAC            16ms/115VAC

 

 

 

 

 

 

 

INPUT

VOLTAGE RANGE            Note.5

90 ~ 305VAC           127 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)

86%

87%

88%

89%

90%

90%

90%

90%

90%

AC CURRENT

0.8A / 115VAC           0.4A / 230VAC           0.32A/277VAC

INRUSH CURRENT(Typ.)

COLD START 55A(twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

8 units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

 

 

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

15 ~ 17V

17.5 ~ 21V

23 ~ 27V

28 ~ 35V

34 ~ 40V

41 ~ 49V

46 ~ 54V

54 ~ 63V

59 ~ 66V

Shut down and latch off o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, re-power on to recover

 

 

ENVIRONMENT

WORKING TEMP.

Tcase=-40 ~ +80℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=+80℃

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

 

SAFETY & EMC

SAFETY STANDARDS Note.8

UL8750, CSA C22.2 No. 250.0-08, ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67, J61347-1, J61347-2-13, BIS IS15885(for 24V only), EAC TP TC 004,GB19510.1,GB19510.14 approved ; design refer to UL60950-1, TUV EN60950-1

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION Note.8

Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV), EAC TP TC 020

 

OTHERS

MTBF

440.5Khrs min.       MIL-HDBK-217F (25℃)

DIMENSION

162.5*43*32mm (L*W*H)

PACKING

0.45Kg; 32pcs/15.4Kg/0.93CUFT

MODEL

LPF-60D-12

LPF-60D-15

LPF-60D-20

LPF-60D-24

LPF-60D-30

LPF-60D-36

LPF-60D-42

LPF-60D-48

LPF-60D-54

 

 

 

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

30V

36V

42V

48V

54V

RATED CURRENT

5A

4A

3A

2.5A

2A

1.67A

1.43A

1.25A

1.12A

RATED POWER                Note.5

60W

60W

60W

60W

60W

60.12W

60.06W

60W

60.48W

CONSTANT CURRENT REGION Note.2

7.2 ~12V

9 ~ 15V

12 ~ 20V

14.4 ~ 24V

18 ~ 30V

21.6 ~ 36V

25.2 ~ 42V

28.8 ~ 48V

32.4 ~ 54V

CURRENT RIPPLE

5.0% max. @rated current

CURRENT TOLERANCE

±5.0%

SETUP, RISE TIME Note.6

1000ms, 80ms / 115VAC         500ms, 80ms / 230VAC

HOLD UP TIME (Typ.)

16ms/230VAC            16ms/115VAC

 

 

 

 

 

 

 

INPUT

VOLTAGE RANGE            Note.5

90 ~ 305VAC           127 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)

86%

87%

88%

89%

90%

90%

90%

90%

90%

AC CURRENT

0.8A / 115VAC           0.4A / 230VAC           0.32A/277VAC

INRUSH CURRENT(Typ.)

COLD START 55A(twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

8 units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

 

 

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed.

OVER VOLTAGE

15 ~ 17V

17.5 ~ 21V

23 ~ 27V

28 ~ 35V

34 ~ 40V

41 ~ 49V

46 ~ 54V

54 ~ 63V

59 ~ 66V

Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, re-power on to recover

 

 

 

ENVIRONMENT

WORKING TEMP.

Tcase=-40 ~ +80℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=+80℃

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

 

SAFETY & EMC

SAFETY STANDARDS Note.8

UL8750, CSA C22.2 No. 250.0-08, ENEC EN61347-1, EN61347-2-13 independent, EN62384, EAC TP TC 004, IP67, J61347-1, J61347-2-13,GB19510.1,GB19510.14 approved ; design refer to UL60950-1, TUV EN60950-1

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION Note.8

Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020

 

OTHERS

MTBF

1202.9K hrs min.       Telcordia SR-332 (Bellcore) ;     396.7Khrs min.      MIL-HDBK-217F (25℃)

DIMENSION

162.5*43*32mm (L*W*H)

PACKING

0.45Kg; 32pcs/15.4Kg/0.93CUFT

MODEL

LPF-90D-15

LPF-90D-20

LPF-90D-24

LPF-90D-30

LPF-90D-36

LPF-90D-42

LPF-90D-48

LPF-90D-54

 

 

 

OUTPUT

DC VOLTAGE

15V

20V

24V

30V

36V

42V

48V

54V

RATED CURRENT

5A

4.5A

3.75A

3A

2.5A

2.15A

1.88A

1.67A

RATED POWER                Note.5

75W

90W

90W

90W

90W

90.3W

90.24W

90.18W

CONSTANT CURRENT REGION Note.2

9 ~ 15V

12 ~ 20V

14.4 ~ 24V

18 ~ 30V

21.6 ~ 36V

25.2 ~ 42V

28.8 ~ 48V

32.4 ~ 54V

CURRENT RIPPLE

5.0% max. @rated current

CURRENT TOLERANCE

±5.0%

SETUP, RISE TIME Note.6

1200ms, 200ms / 115VAC        500ms, 200ms / 230VAC

HOLD UP TIME (Typ.)

16ms/230VAC            16ms/115VAC

 

 

 

 

 

 

 

INPUT

VOLTAGE RANGE            Note.5

90 ~ 305VAC           127 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF≧0.97/115VAC, PF≧0.96/230VAC, PF≧0.95/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

TOTAL HARMONIC DISTORTION

THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.)

89%

89.5%

90%

90.5%

90.5%

90.5%

90.5%

90.5%

AC CURRENT

0.95A / 115VAC           0.5A / 230VAC           0.4A / 277VAC

INRUSH CURRENT(Typ.)

COLD START 70A(twidth=435μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

 

 

PROTECTION

OVER CURRENT

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

18 ~ 21V

23 ~ 27V

28 ~ 34V

34 ~ 38V

41 ~ 46V

47 ~ 53V

54 ~ 60V

59 ~ 65V

Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, re-power on to recover

 

 

 

ENVIRONMENT

WORKING TEMP.

Tcase=-40 ~ +70℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=+70℃

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

 

 

SAFETY & EMC

SAFETY STANDARDS Note.8

UL8750(type”HL”), CSA C22.2 No.250.13-12, TUV EN61347-1, EN61347-2-13, J61347-1, J61347-2-13, EAC TP TC 004, GB19510.1,GB19510.14,IP67 approved ; Design refer to UL60950-1, TUV EN60950-1

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION Note.8

Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020

 

OTHERS

MTBF

1036.4K hrs min.       Telcordia SR-332 (Bellcore) ;     267.2Khrs min.      MIL-HDBK-217F (25℃)

DIMENSION

161*61*36mm (L*W*H)

PACKING

0.7Kg;20pcs/15Kg/0.73CUFT

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question