MODEL

CLG-60-12

CLG-60-15

CLG-60-20

CLG-60-24

CLG-60-27

CLG-60-36

CLG-60-48

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

27V

36V

48V

CONSTANT CURRENT REGION Note.5

8.4 ~ 12V

10.5 ~ 15V

14 ~ 20V

16.8 ~ 24V

18.9 ~ 27V

25.2 ~ 36V

33.6 ~ 48V

RATED CURRENT

5A

4A

3A

2.5A

2.3A

1.7A

1.3A

CURRENT RANGE

0 ~ 5A

0 ~ 4A

0 ~ 3A

0 ~ 2.5A

0 ~ 2.3A

0 ~ 1.7A

0 ~ 1.3A

RATED POWER

60W

60W

60W

60W

62.1W

61.2W

62.4W

RIPPLE & NOISE (max.) Note.2

2Vp-p

2.4Vp-p

1.8Vp-p

2.7Vp-p

2.7Vp-p

3.6Vp-p

4.6Vp-p

VOLTAGE ADJ. RANGE

11.5 ~ 13V

14.5 ~ 16.2V

19.5 ~ 22V

24 ~ 26V

25 ~ 30V

32.5 ~ 39V

43.6 ~ 51.8V

Fixed can be modified between the range above

CURRENT ADJ. RANGE

Fixed. Can be modified between 3% ~ -25% rated output current

VOLTAGE TOLERANCE Note.3

±10%

LINE REGULATION

±3.0%

LOAD REGULATION

±5.0%

SETUP TIME

500ms / 230VAC 3000ms / 115VAC at full load

INPUT

VOLTAGE RANGE            Note.4

90 ~ 295VAC          127 ~ 417VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

PF>0.94/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)

TOTAL HARMONIC DISTORTION

THD< 20% when output loading≧70% at 115VAC/230VAC input and output loading≧75% at 277VAC input

EFFICIENCY (Typ.)

85%

86%

87.5%

87%

88%

89%

89%

AC CURRENT (Typ.)

0.8A/115VAC          0.4A/230VAC          0.3A/277VAC

INRUSH CURRENT(Typ.)

COLD START 35A(twidth=45μs measured at 50% Ipeak) at 230VAC

MAX. No. of PSUs on 16A CIRCUIT BREAKER

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

PROTECTION

OVER CURRENT

95 ~ 110%

Protection type : Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

13.8 ~ 16V

17.5 ~ 21V

23 ~ 28V

28 ~ 32V

31 ~ 35V

41 ~ 46V

54 ~ 60V

Protection type : Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.

-30 ~ +70℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS

UL879, UL8750, UL1310, EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13 independent, CAN/CSA C22.2 No. 223-M91(except for 48V), CSA C22.2 No. 250.0-08(except for 48V), CSA C22.2 No. 207-M89(except for 48V), GB19510.1,GB19510.14,J61347-1, J61347-2-13,

 EAC TP TC 004, IP67 approved

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

Compliance to EN55015, EN61000-3-2 Class C (≧75% load) ; EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), EAC TP TC 020

OTHERS

MTBF

495.7Khrs min.       MIL-HDBK-217F (25℃)

DIMENSION

195.6*61.5*38.8mm (L*W*H)

PACKING

0.86Kg; 16pcs/14.8Kg/0.54CUFT

MODEL

CLG-100-12

CLG-100-15

CLG-100-20

CLG-100-24

CLG-100-27

CLG-100-36

CLG-100-48

OUTPUT

DC VOLTAGE

12V

15V

20V

24V

27V

36V

48V

CONSTANT CURRENT REGION Note.7

9 ~ 12V

11.25 ~ 15V

15 ~ 20V

18 ~ 24V

20.25 ~ 27V

27 ~ 36V

36 ~ 48V

RATED CURRENT

Note.5

5A

5A

4.8A

4A

3.55A

2.65A

2A

RATED POWER

Note.5

60W

75W

96W

96W

95.85W

95.4W

96W

RIPPLE & NOISE (max.) Note.2

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

150mVp-p

200mVp-p

VOLTAGE ADJ. RANGE

Fixed. Can be modified between 0% ~ -15% rated output voltage

CURRENT ADJ. RANGE

Fixed. Can be modified between 3% ~ -25% rated output current

VOLTAGE TOLERANCE Note.3

±3.0%

±3.0%

±3.0%

±3.0%

±3.0%

±2.0%

±2.0%

LINE REGULATION

±1.0%

LOAD REGULATION

±2.0%

SETUP, RISE TIME

500ms, 80ms / 230VAC              1200ms, 80ms / 115VAC at full load

HOLD UP TIME (Typ.)

60ms / 230VAC             30ms / 115VAC at full load

INPUT

VOLTAGE RANGE

Note.4

90 ~ 295VAC             127 ~ 417VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

PF>0.95/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)

TOTAL HARMONIC DISTORTION

THD< 20% when output loading≧75% at 115VAC/230VAC input and output loading≧75% at 277VAC input

EFFICIENCY (Typ.)

83%

85%

88.5%

88.5%

88%

88%

88.5%

AC CURRENT (Typ.)

12V:0.8A/115VAC      0.4A/230VAC     0.3A/277VAC                 15V:0.9A/115VAC

20V ~ 48V:1.1A/115VAC 0.55A/230VAC 0.45A/277VAC

0.45A/230VAC

0.35A/277VAC

INRUSH CURRENT(Typ.)

COLD START 40A(twidth=1030μs measured at 50% Ipeak) at 230VAC

MAX. No. of PSUs on 16A CIRCUIT BREAKER

3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 240VAC

PROTECTION

OVER CURRENT (Typ.)

95 ~ 102%

Protection type : Constant current limiting, recovers automatically after fault condition is removed

SHORT CIRCUIT

Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

13 ~ 16V

16.5 ~ 20V

22 ~ 27V

27 ~ 34V

30 ~ 36V

39 ~ 48V

52 ~ 64V

Protection type : Shut down and latch off o/p voltage, re-power on to recover

OVER TEMPERATURE

Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.

-30 ~ +70℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 95% RH non-condensing

STORAGE TEMP., HUMIDITY

-40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 50℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS Note.8

Ul879, UL1310, UL8750, CSA C22.2 No. 207-M89, EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13 independent, TUV EN60950-1,CAN/CSA C22.2

No.223-M91(except for 48V), CAN/CSA C22.2 No. 250.13-12,GB19510.1,GB19510.14,J61347-1, J61347-2-13,EAC TP TC 004,IP67 approved ;

design refer to UL60950

WITHSTAND VOLTAGE

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

Compliance to EN55015, EN55032 Class B, EN61000-3-2 Class C (≧75% load) ; EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), EAC TP TC 020

OTHERS

MTBF

301Khrs min. MIL-HDBK-217F (25℃)

DIMENSION

222.2*68*38.8mm (L*W*H)

PACKING

1.0Kg; 12pcs/13Kg/0.58CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Derating may be needed under low input voltages. Please check the static characteristics for more details.

5. This is the maximum possible  output  current  and power,  over load protection  may be activated  slightly  below this level to comply  with the requirement of UL1310 class 2.

6. 3 years warranty is guaranteed for operating ambient temperature no higher than 68℃.

7. Please refer to "DRIVING METHODS OF LED MODULE".

8. Safety and EMC design refer to EN60598-1, subject 8750(UL}, CNS15233, GB7000.1, FCC part18.

9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.